Saturday, August 17, 2013

Clay Faux Marble

Does the sentiment look a bit like it's carved in stone? It's actually stamped Simply Pressed Clay!






 -dye 2 pieces of Simply Pressed clay with ink refills
-knead the colours together and place on a hard surface
-position 2 craft sticks on either side of the clay to roll it an even thickness
-stamp the rolled clay and let dry overnight
-cut a shape with the Big Shot and framelit






Supplies
Stamps
-One in a Million 132052
Ink
-Basic Black ink pad 126980
-Smoky Slate ink refill 131159
-Basic Gray ink refill 109121
Paper
-Smoky Slate card stock 131202
-Basic Gray card stock 121044
-Whisper White card stock 100730
-Basic Black card stock 121045
Tools
-Big Shot 113439
-Chalk Talk framelits 129983
-Pretty Print embossing folder 132175
-piercing tool 126189
-rolling pin
-wooden craft sticks
Accessories
-Basic Black 1/8 in. Taffeta ribbon
-Silver 1/8 in. Mini brads 122941

Monday, August 5, 2013

Embossing Powder Rose

The "gold" rose on my card is made from melted embossing powder poured into a Simply Pressed Clay mould. Because the moulds are made of silicone they can handle the heat.

I used an aluminum spoon from an old chemisty set and my heat tool to melt the embossing powder. The handle gets really hot so make sure to protect your fingers. Take a look at a second-hand store for a cheap spoon with a plastic handle. 

The volume of embossing powder really diminishes when it's melted, so you have to use a lot. Also, it loses its metallic look if you heat it too long.

I got inspired to make some wearables, too!







Mount the embellishments on Brushed Gold card stock(102935). Trim it and back it with Coaster Board (129392) and glue on a pin. 







Make two EP roses and glue them to post earring findings.










I swapped some of these at Convention!






-melt some Embossing Powder in a spoon with your heat tool

-pour it into the Simply Pressed clay mould
-press plastic against the back if you want it flat
-BE CAREFUL! It can be hot!
-lift the plastic to remove the flower
-trim away any excess material
-cut a heart from scrap card stock
-position it on the stamped mat with temporary adhesive
-position the cut-out over the heart with temporary adhesive and remove the heart
-arrange the embellishments in the cut out
-adhere the embellishments with glue dots and remove the cut-out







Supplies
Stamps
-En Francais 128562
-Loving Thoughts 128436
Ink
-Crumb Cake pad 126975
-VersaMark pad 102283
Paper
-Naturals Ivory card stock 101849
-Soft Suede card stock 115318
-Baked Brown Sugar card stock 131296
Tools
-Big Shot 13439
-Hearts Collection framelits 125599
-Heat tool 129053
-Blossom and Buttons Simply Pressed Clay moulds 131272
Accessories
-Neutrals Designer buttons 130031
-Very Vintage Designer buttons 129327
-In Color Boutique Details 130938
-Vintage Faceted Designer buttons 127555
-Antique brads 117273
-Pearl Basic Jewels 119247
-Large Pearl Basic Jewels 125577
-Baked Brown Sugar Ruffle Stretch trim 130022
-Victoria Crochet trim 118481
-Glue dots 103683
-Gold embossing powder 109129

Friday, August 2, 2013

Flip Card Framelits are here!

Cards with a mechanism that moves are so much fun but time consuming to make. The new Flip Card framelits from Stampin' Up! are easy to use. Just cut the pieces with your Big Shot and start creating your flip cards.

There are two different sets of framelits. In each one you get the card die and lots of extra die shapes.


133479 Label flip card framelit  $40.95
133480 Circle flip card framelit $40.95

Watch the video to see some inspiring samples. http://www.youtube.com/watch?v=CwdGSYeIn44#at=35

Don't own a Big Shot yet? It's the perfect creative tool. Check out this fun video to see just how much we love it! http://www.youtube.com/watch?v=7B0Be9yOlkQ

Wednesday, July 31, 2013

Stamped Clay Button

With so many Stampin' Up! buttons to choose from it was hard to want to try the Simply Pressed button moulds. As usual, inspiration came from my youngest child and muse.

Her idea was to draw or paint designs on a clay button. (Being a stamper, well obviously I used a stamp.)



Then, I got inspired to add a mechanism to my design! And, to make a masculine version!

By the way, that foil card stock is in the new Holiday Catty. Check out the link in the left margin tomorrow.
-press the clay into the mould and place it in the freezer
-when it's hardened, pop out the button and air-dry overnight
-cut all the labels using Big Shot and Chalk Talk framelits
-stamp the sentiments and the clay button
-assemble the pieces on a foam mat and pierce holes for the button and brad
-punch a 1/8 in. circle in the black label over the pierced hole

-punch 1/8 in. circles in the silver foil piece over the pierced holes
-position the button over the holes and thread 2 short lengths of ribbon through the holes
-secure the ribbon with glue dots and trim the ends
-secure the sentiments labels with a brad and adhere them to the foil circle
-adhere the whole mechanism to the stamped card front





Supplies
Stamps
-Dictionary 130348
-One in a Million 132052
Ink
-Basic Black ink pad 126980
-Melon Mambo or Smoky Slate marker
Paper
-Melon Mambo 115320 or Smoky Slate 131202 card stock
-Whisper White card stock 100730
-Basic Black card stock 121045
-Silver Foil card stock 132178
Tools
-Big Shot 113439
-Chalk Talk framelits 129983
-2-1/2 in. Circle punch120906
-1/8 in. hand punch
Accessories
-Brad Bases 132293
-Basic Rhinestones 119246 or Neutrals Candy Dots 130934
-Hung Up Cute Clips 129389
-Basic Black 1/8 in. Taffeta ribbon 119261

Wednesday, July 24, 2013

Buttons and Blossoms Simply Pressed Clay and Moulds

What fun I've been having trying out the new Buttons and Blossoms silicone moulds and Simply Pressed clay from the new Annual Catty!

Just press the clay into the mould, freeze it for 10 minutes, pop out an embellishment and let it air-dry overnight. The clay stays spongy when it dries and is easy to dye, cut, or otherwise alter.












-dye the clay with Blushing Bride ink
-press the coloured clay into the mould and place it in the freezer
-pop the flower out of the mould and set aside to dry overnight
-paint the flower with an Aqua Painter and Raspberry Ripple ink

-remove ink with a tissue and let dry
-colour the centre of the flower with a Crushed Curry marker
-fray the end of a length of Soft Sky seam binding
-pull a thread near the edge to gather
-use the Big Shot and Delicate Doilies Sizzlit to cut Whisper White card stock
-apply adhesive to the doily and adhere a curl of gathered seam binding
-apply glue to the back of the clay flower and adhere it to the seam binding
-place the Adorning Accents edgelit with the cutting edge up on the magnetic platform in the Big Shot
-mark the wrong side of the card front 5/8 in. from the bottom right and 3-5/8 in. from the bottom left
-place the card stock right side down on the edgelit
-cover with a cutting mat and run through the Big Shot






Supplies
Stamps
-Hello, Doily 128610
-Loving Thoughts 128436
Ink
-Blushing Bride ink refill 131157
-Raspberry Ripple ink pad 126859
-Crushed Curry marker
-Marina Mist ink pad 126962
-Whisper White Craft pad 101731
Paper
-Marina Mist card stock 119682
-Soft Sky card stock 131203
-Whisper White card stock 100730
Tools
-Big Shot 113439
-Magnetic Platform 130658
-Adorning Accents edgelits 125595
-Delicate Doilies sizzlits 126999
-Simply Pressed Clay moulds 131272
Accessories
-Simply Pressed Clay 130685
-Soft Sky seam binding 131210