Pages

Monday, February 25, 2013

Vellum Swallowtail


I stamped the butterfly image on vellum with White StazOn ink. The vellum mat softens the black card stock mat, giving the card a dreamy appearance.

Supplies
Stamps
-Swallowtail 129213
-Fabulous Phrases 117002
Ink
-White StazOn pad 106960
-Basic Black pad 126980
Paper
-Pink Pirouette card stock 111351
-Basic Black card stock 121045
-Vellum card stock 101856
-Whisper White card stock 100730
Tools
-Modern Label punch 119849
Accessories
-Basic Black 1/8 in. taffeta ribbon 119261
-Neutrals brads 119736

Sunday, February 24, 2013

Faux Silk Swallowtail

A mist of Shimmer Paint Spray makes this crumpled tissue paper technique glow like silk.


Shimmer Paint Spray
In a small spray bottle, combine 2 oz. 70% Rubbing Alcohol and 1/2 teaspoon Shimmer paint. (I used Frost White 116854.)









-cut a piece of double-sided Multi-purpose adhesive sheet and apply it to a card stock mat
-sponge inks on tissue paper and let dry
-crumple tissue paper and smooth out slightly
-remove release paper from adhesive sheet
-position tissue paper over mat and press it onto the adhesive
-stamp image on tissue covered mat
-apply inks to the image with sponge daubers
-mist with Shimmer Paint spray
-speed drying with a heat tool to minimize bleeding inks
-trim the mat to size
-lightly sand the edges of the mat



Supplies
Stamps
-Swallowtail 129213
-Tiny Tags 118091
Ink
-Summer Starfruit pad 126991
-Bashful Blue pad 126961
-Old Olive pad 126953
-River Rock pad 126977
Paper
-River Rock card stock 108640
-Always Artichoke card stock 105119
-Naturals Ivory card stock 101849
-tissue paper
Tools
-Jewellery Tag punch 117190
-sandpaper
Accessories
-Multi-purpose adhesive sheets 120805
-Linen thread 104199

Friday, February 22, 2013

Telescopic Swallowtail

To achieve this optical illusion effect, stack three mats and stamp them at the same time.

I used markers to colour the butterfly, then blended them with an Aqua Painter.

Be sure to use a solvent-based permanent ink like Jet Black StazOn on the stamp whenever you plan to colour the image.













-cut three mats from card stock
-use temporary adhesive to hold them together and stamp the image (The  missing image around the edges will be covered by the dark mats.)
-colour the image with markers, then blend with an Aqua Painter and let dry
-adhere the large coloured mat to the card front
-stack and adhere the small and medium mats together with the dark mats
-wrap with linen thread and adhere the stack to the card front
-add the pin and tag


Supplies
Stamps
-Swallowtail 129213
-Tiny Tags 118091
Ink
-Jet Black StazOn pad 101406
-So Saffron marker
-More Mustard marker
-Cajun Craze marker
-Baja Breeze marker
-Marina Mist marker
-Wild Wasabi marker
Paper
-Very Vanilla card stock 101650
-Not Quite Navy card stock 100867
-So Saffron card stock 105118
Tools
-Aqua Painter 103954
-Jewellery Tag punch 117190
Accessories
-Linen thread 104199
-Vintage Trinkets 118764

Tuesday, February 19, 2013

Shimmered Swallowtail

I combined three techniques to create this pretty card.















Heat Embossing
-swipe the card stock with an embossing buddy
-apply a VersaMark pad to the image and stamp on card stock
-cover with Pool Party embossing powder and shake off the excess
-melt the powder stuck to the image with a heat tool

Ink Resist
-colour with markers and sponge daubers


Shimmer Paint
-dab with a tissue to remove ink from embossed areas
-apply Champagne Shimmer Paint with an Aqua Painter over the image
-heat again with a heat tool (Don't worry if it smokes a bit)





Supplies
Stamps
-Swallowtail 129213
-Loving Thoughts 125843
Ink
-VersaMark pad 102283
-Pool Party ink pad 126982
-So Saffron marker
-Summer Starfruit marker
-Baja Breeze marker
-Marina Mist marker
Paper
-Pool Party card stock 122924
-So Saffron card stock 105118
-Very Vanilla card stock 101650
Tools
-Heat Tool 129053
-Large Oval punch 119855
-Aqua Painter 103954
Accessories
-Very Vanilla seam binding 120999
-Pool Party embossing powder 129398

Friday, February 15, 2013

Tea for Two Suite

I usually have to agonize over choosing what to do with the latest fabrics from Stampin' Up!, but this time it was obvious. A tea cozy with pinwheels! How great that I had enough fabric for a hot mat and 2 napkins! After that the rest was easy. I used the Designer Series Paper to make labels for my jars of  herbal teas, placed paper doilies under the cups in the saucers, and finally, I hung the Tea Time Trinket Charms from the chains on some tea balls. Tea for Two!


-use the Labels Collection Framelits (125598) to cut out the Tea for Two DSP (129311) and sponge the edges with Early Espresso ink (126974)
-use the Scallop Oval punch (119856) to cut out Early Espresso card stock (119686)
-use the Large Oval punch (119855) to cut out printed Very Vanilla card stock (101650)
-layer them and stick them to the jar


I love these charms! They're perfect on the ends of the tea infuser chains.


















Hot Mat
My quilted hot mat is 12 inches square.

Wash and dry the Tea For Two package of three fat quarters (129308). You will also need batting and cotton lining fabric.

Press and square the edges.

All seam allowances are a scant 1/4 in. unless otherwise noted.








Pinwheel Print
-for the Hot Mat you will use the 2-1/2 in. strips
-set aside the other pieces for the Tea Cozy











Calypso Coral Print
-for the Hot Mat you will used most of the 2-1/2 in. strips and all of the 2-7/8 in. strips
-set aside the square for the napkin



Baja Breeze Print
-for the Hot Mat you will used most of the 2-1/2 in. strips and all of the 2-7/8 in. strips
-set aside the square for the napkin











-cut the 2-7/8 in. Calypso Coral strips into 8 squares
-cut the 2.7/8 in. Baja Breeze strips into 8 squares
-place a Baja Breeze square on a Calypso Coral square with right sides together
-mark diagonally with a disappearing marker or pencil
-sew a scant 1/4 in. on both sides of the line
-cut on the line and press the square open
-trim off the little triangles/dog ears



-sew 2 squares together
-press seam toward Calypso Coral




-sew sections into blocks
-sew blocks together
-notice the direction of the seams on the back









-sew the short Pinwheel Print strips to the sides of the block
-press seams toward Pinwheel Print








-sew the long Pinwheel Print strips to the sides
-press the seams toward the Pinwheel Print










-press twelve 2-1/2 in. Baja Breeze Print squares on the diagonal
-press again on the diagonal

-press twelve 2-1/2 in. Calypso Coral Print squares on the diagonal
-press again on the diagonal





-pin six triangles to each side of the pieced block overlapping the corners
-baste a scant 1/4 in. from the edge







-cut a piece of batting 11-3/4 X 11-3/4
-position the batting on the wrong side of the block










-cut a piece of cotton lining fabric 12-1/2 X 12-1/2
-position the lining on the right side of the block
-sew a scant 1/4 in. from the edge, leaving an opening for turning


-trim corners
-press lining seam allowances toward centre
-turn right side out and press







-hand stitch opening closed









-quilt on right side as shown on the wrong side










Tea Cozy
Use the remaining fabric pieces to make this Tea Cozy.

You will also need batting and cotton lining fabric.











-cut two 7 X 13 lining pieces
-sew the 1 X 13 strip of Pinwheel Print to one side of the lining
-sew the 9 X 13 piece of Pinwheel Print to the other side of the lining
-press the seams toward the print






-measure and mark 1/2 in. from seams on sides
-snip 5/8 in. at markings







-sew 5/8 in. seam across bottom to join sections
-press seam open








-turn right side out











-to hem the slit in the middle, fold one section back over the other section






-sew 5/8 in. seam between snips keeping the inside section free
-trim seam to 1/4 in.







-turn right side out and press









-repeat the steps on the unfinished edge









-turn right side out and press










-with right sides together, sew a 5/8 in. seam between the snips on the ends of both sections
-turn right side out and press







-sew a 5/8 in. seam to join top tabs in the middle












-turn right side out and press










-hem the tabs at the sides by folding over twice and stitching close to the fold








-sew a row of stitching on the seam on the bottom
-sew another row of stitching 1/2 in. away to form casing for elastic








-turn section inside out and pin 6 X 11-1/2 piece of batting to wrong side of Pinwheel Print









-turn right side out
-the top edge of the batting should be 1/2 in. below the seam






-pin remaining fabric triangles from Hot Mat to the top raw edge of the Pinwheel Print
-sew a scant 1/4 in. from the edge
-press the seam toward the Pinwheel Print





-press 1/4 in. of the facing strip to the inside









-hand stitch the hemmed sides together, leaving a slit for the ribbon










-hand stitch to folded edge of the facing to the seam with the fabric triangles









-sew a row of stitching along the seam of the facing and the lining
-sew another row of stitching 1/2 in. away to form casing for ribbon
-the quilting was sew on the right side following the pattern of the Pinwheel Print






-cut a piece of 1/4 in. elastic the same 1 in. less than the measurement of the base of your teapot
-insert the elastic into the bottom casing
-pin the ends of the elastic even with the edges of the fabric
-sew a 5/8 in. seam through all layers
-trim the seam to 1/4 in. and press open
-secure with zigzag stitching



-thread 30 in. of 1/4 in. wide ribbon through top casing
-to dress your teapot, insert the spout through the slit in the middle of the Tea Cozy and tie the ribbon in a bow above the handle, while gathering the casing.







Napkins


-layer the fabric reserved for the napkins
-trim to 14 X 14 in.
-fold over 1/4 in. on edges and press
-fold over 1/4 in. again and press
-stitch close to the fold to hem